Communication base station outdoor integrated cabinet [secret] technical performance indicators and main characteristics!

　　Communication base station outdoor integrated cabinet [secret] technical performance indicators and main characteristics! Jinhua Zhongxing Communication Technology is a professional communication base station outdoor integrated cabinet manufacturer, outdoor communication room, environmental monitoring station room, air monitoring station room, atmospheric monitoring station cabinet, outdoor cabinet, outdoor integrated room, outdoor communication room, environmental protection station room,IDC integrated integrated room, communication base station outdoor cabinet, Has a complete communication base station outdoor integrated cabinet (shelter), tower mast production line, the annual production integration capacity of more than 10,000 sets. Dedicated to domestic and foreign communication operators, data integrators, environmental monitoring manufacturers and other customers, to provide three-dimensional, all-round product production and engineering delivery, operation and maintenance and other technical services. The outdoor integrated cabinet is mainly used for wireless communication base stations, including the new generation of 4G systems, communication networks/network integrated services, access/transmission exchange stations, emergency communication/transmission, etc.

The outdoor integrated cabinet of the communication base station is made of galvanized sheet with a thickness of 2.0MM, which is composed of an external box, internal galvanized workpieces and accessories. Integrated cabinet, communication base station outdoor integrated cabinet is divided into two equipment compartments and battery compartments according to functions. The box has compact structure, easy installation and good sealing performance. The equipment cabinet adopts an independent cabinet, and the equipment installed in the cabinet meets the standard 19-inch setting. It is suitable for installing all kinds of 19-inch devices. Battery cabinet, used to install batteries, independent communication base station outdoor integrated cabinet. The door panel of the outdoor integrated cabinet of the communication base station is affixed with thermal insulation foam to achieve thermal insulation effect. The cabinet is provided with an exhaust device to release the harmful gas produced by the battery. The outdoor integrated cabinet door of the communication base station adopts a built-in structure, and a circle of the door frame is equipped with a seal strip, and the gap between the door is compact. The door opening Angle is greater than 110°, the cabinet door contains a limiting structure, and the threshold device has a limiting effect when the door is in the "open" state. The door lock adopts the two points fixed structure of the upper and lower pull rod, the structure is firm, and the anti-theft is strong. Each communication base station outdoor integrated cabinet is equipped with a door opening alarm device to cooperate with environmental monitoring.

Second, the main characteristics of outdoor cabinets

1, the box with dust, sun, rain and other characteristics, a full range of outdoor environment.

2. The equipment compartment of the integrated cabinet uses heat exchange as heat dissipation, and the battery compartment uses semiconductor air conditioning for heat dissipation and anti-freezing

3, the equipment cabinet adopts heat exchange or compressor air conditioning as heat dissipation equipment.

4. The battery cabinet uses semiconductor heat dissipation or antifreeze.

5, each communication base station outdoor integrated cabinet is equipped with DC-48V LED lighting.

6, communication base station outdoor integrated cabinet with access control, oil interface device.

7. The outdoor integrated cabinet of the communication base station is simple, the installation of power equipment and monitoring equipment is convenient, the grounding operation is convenient, and the maintenance is convenient. The power cord, signal cable and optical cable have independent entry holes, which will not interfere with each other.

Three, the main technical performance indicators

1, use conditions: ambient temperature: -40℃, +60℃, ambient humidity: ≤95% (+40℃); Atmospheric pressure: 70KPa̴̴- 106KPa ̴̴;

2, material: hot dip galvanized, cold plate and color steel insulation board;

3, surface treatment: rust removal, anti-rust phosphating (or galvanized), spray (PANTONE428C);

4, communication base station outdoor integrated cabinet bearing ≥500Kg

5, body protection level: IP55;

6, flame retardant: meet the requirements of GB5169.7 test A;

7. Insulation resistance: The resistance between the ground bar and the metal parts of the box is less than 0.1Ω

4. Functional components, AC air conditioning system, see Annex 1, AC air conditioning manual, DC air conditioning, see Annex 2, DC air conditioning manual, lighting system, each cabin is equipped with DC-48V LED lights

Five, installation

1. Unpack and inspect the goods. Only after the goods arrive at the installation site can the unpack and inspect the goods. During inspection, unpack, take out the packing list, check the correctness and integrity of the equipment against the packing list, and check whether the goods are damaged.

2. During installation, if the outdoor integrated cabinet of the communication base station needs to be lifted by the lifting ring, the installation personnel should first open the outdoor integrated cabinet door of the communication base station to confirm that there is no other equipment in the cabinet. If there is no other equipment, the lifting ring can be used. If other devices are found installed in the cabinet, our company suggests using the rope through the base hole to lift, as shown in the figure

3, box installation, prefabricated cement base, cement base dimensions of 950mm(W)*950mm (D)* 500 (H) with 4 M16*120 anchor bolts, put the box on the cement base, align the anchor bolts, and then screw on the nut, with a hex wrench lock. After the outdoor integrated cabinet of the communication base station is installed, shaking the outdoor integrated cabinet of the communication base station from different directions should not feel obvious loosening and shaking. Communication base station outdoor integrated cabinet door opening method

4, in the installation process and later use and maintenance process need to open and close the communication base station outdoor integrated cabinet door. The following is the method of opening and closing the outdoor integrated cabinet door of the communication base station. Insert the key into the keyhole and turn it clockwise until the handle pops out. Hold the handle with your hand and turn it 90 degrees counterclockwise to pull the door outward until it opens. Adjust the door limit support rod to an appropriate position to fix the outdoor integrated cabinet door of the communication base station. Before closing the door, the door limit support rod is restored to its original position, and then the door is closed. Finally, turn the handle back to the original position and press until you hear the "click" sound. Install the battery protection bar in the battery compartment

6. Battery installation method: After the outdoor integrated cabinet of the communication base station is installed, remove the battery protection bar inside the outdoor integrated cabinet of the communication base station before the battery is put into the battery bin, otherwise the battery cannot be put into the cabinet. The following figure shows the battery protection baffle to be removed. Install the removed battery protection baffle in the original position, as shown in the figure above.

Seven, daily maintenance, in order to ensure the reliability of the power supply system, it is necessary to do daily maintenance work, so that the power system works in the best state. The specific maintenance items are as follows: Clean the power supply regularly to prevent dust accumulation. Check whether the parameters of the power system are normal once a week. If an exception occurs, rectify it in time. If an alarm is generated, handle it in time. Check whether the lightning arrester is damaged every month or after a thunderstorm. If it is damaged, replace it in time. Check the fuse once a month, and have a certain number of spare fuse, in case of failure can be replaced in time. Check input and output cables once a month. Check whether the connection end of the cable is loose or in poor contact. Check whether the cable is intact. If damaged, replace it in time. Check every six months whether each air switch can be switched on and off flexibly and whether there are abnormal conditions such as burning. Battery maintenance shall be carried out according to the relevant instructions of the battery.

Eight, communication base station outdoor integrated cabinet packaging, transportation, storage

1, communication base station outdoor integrated cabinet transport, product transport should be carried out in the case of intact packaging, must be covered with canvas to prevent moisture and rain, snow or liquid substances during transportation. Stacking should be orderly, compact, reasonable, safe and reliable, prevent damage caused by shaking during transportation, and prohibit upside down. In the communication base station outdoor integrated cabinet long-distance transportation, it is not allowed to be installed in an open boat or carriage, and it is not allowed to be placed in an open warehouse during transit, and it is not allowed to be loaded with flammable, explosive, and easily corroded items in the same car during transportation. Do not roll over and invert during the handling to prevent mechanical damage to components of the outdoor integrated cabinet of the communications base station. 5. The number of transfers should be minimized during transportation, and mechanical operations should be used for transportation and handling to avoid rough handling operations.

　　2, communication base station outdoor integrated cabinet storage, valid for 1 year from the date of packaging. During this period, the warehouse storing the outdoor integrated cabinet of the communication base station should have good ventilation, and the acidic, alkaline or other harmful gases in the air should meet the requirements of environmental protection regulations. All packing cases must be moisture-proof, that is, the packing should be placed on a material rack 30 cm above the ground and 40 cm above the wall. The packing boxes of the outdoor integrated cabinet of the communication base station shall be stacked strictly according to the storage and transportation diagram on the box, and the number of stacked layers shall not be greater than the limit number of layers specified by each box. The packaged products should be delivered immediately after acceptance, or the storage and transportation period should be controlled within half a year, and the unpacking period should not exceed 3 months after the arrival of the goods at the destination. If there are special circumstances, the supply and demand parties can agree to determine the specific requirements of outdoor integrated cabinet storage and transportation of communication base stations.