The key to the normal operation, safety and stability of telecom integrated outdoor cabinet equipment!

　　The key to the normal operation, safety and stability of telecom integrated outdoor cabinet equipment! Rich in power resources, and has a large power generation, transmission and distribution integration of power system, low-voltage distribution box telecommunications integrated outdoor cabinet in a common cabinet, distribution box box box with spray plastic or galvanized Angle steel skeleton, coated with stainless steel plate, box surface without glare and reflection, The structural design should make the distribution box rain, dust, anti-theft, anti-leakage, anti-lightning, anti-electromagnetic interference, heat insulation, ventilation and heat dissipation, moisture-proof, sufficient strength to ensure that the transportation and installation process will not be deformed.

The cabling mode of the telecom integrated outdoor cabinet is from the side of the box. Special stainless steel waterproof elbows are installed. Waterproof rubber pads are configured between the elbows and the box to facilitate cable connection. The outlet cables are in two forms: side outlet and bottom outlet of the box. The inlet and outlet cables are sealed with epoxy resin plate of not less than 2mm. The box door and top cover should be made of modern advanced foam heat insulation and flame retardant technology.

First of all, the telecom integrated outdoor cabinet must have reliable stability and security after assembly. In this way, under the action of vibration or other external forces, the cabinet should not be zero, not into the loose phenomenon, there should be no abnormal sound.

1. The edges and other parts of the physically accessible parts of the outer surface of the telecommunication integration outdoor cabinet must be blunted and deburred, and the exposed sharp corners, edges, and rough surfaces that may cause harm must be deburred before the surface spraying or electroplating.

2. The cable hole of the cable rack or cable trough must be deburred to prevent the wire skin from breaking due to shaking when the wire is passed through.

3. The length of the nut protruding from the end of the screw for the telecommunication integration outdoor cabinet is generally not greater than the diameter of the screw and not less than two pitch.

4, telecommunications integration outdoor cabinet parts should ensure good interchangeability. The mechanical connections of all components on the telecom integrated outdoor cabinet must be secure and reliable.

5. The grounding requirements of the telecommunications integrated outdoor cabinet are as follows: the conductive part has no rust and conducts electricity well. As long as the above points are grasped, the safety and quality of the telecom integrated outdoor cabinet will reach 100% customer satisfaction.

       Jinhua Zhongxing Communication Technology is a professional telecommunications integrated outdoor cabinet manufacturer, outdoor shelter, outdoor room, standard shelter, pull-out shelter, folding shelter, outdoor cabinet, field barracks, assembled/assembled room/cabinet, outdoor cabinet, emergency communication vehicle, with an annual production integration capacity of more than 10,000 sets. Wholeheartedly for domestic and foreign customers. Provide three-dimensional. A full range of product production and engineering delivery, telecommunications integrated outdoor cabinet operation and maintenance and other technical services!